Innovation and safety: the Elegant series

Elegant Series

12 models from 4 to 11S. 0.4–3 mm PVC edge band, 8–50 mm workpiece thickness.

Elegant series comparison

Units and key values of all 12 Elegant models side by side, taken from our technical data sheets.

Elegant	4	4R	4S	5S	6	6R	6S	7S	8S	9S	10S	11S
7-inch touchscreen	No	No	No	Yes	Yes	No	Yes	Yes	Yes	Yes	Yes	Yes
DIA pre-milling	No	No	No	No	Yes	Yes	Yes	Yes	No	No	Yes	Yes
Corner rounding (trim)	No	No	No	No	No	No	No	No	Yes	Yes	Yes	Yes
Radius scraping	No	Yes	Yes	Yes	No	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Flat scraping	Yes	No	No	No	Yes	No	No	No	No	No	No	No
Solvent spraying	No	No	Yes	Yes	No	No	Yes	Yes	Yes	Yes	Yes	Yes
Buffing	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Jumping grooving unit	No	No	No	Yes	No	No	No	Yes	No	Yes	No	Yes
Feed speed	15m/min	12 m/min	15 m/min	15 m/min	12 m/min	12 m/min	12 m/min	12 m/min	12 m/min	12 m/min	12 m/min	12 m/min
Total power	6.3 kW	6.3 kw	6.3 kw	8.5 kW	8.1 KW	8.1 Kw	8.1 kW	10.3 kw	6.3 kw	8.5 kw	8.1 kw	10.3 kW
Length	300cm	300 cm	325 cm	347 Cm	330 cm	330 cm	355 cm	380 cm	370 cm	392 cm	400 cm	422 cm
Weight	700 kg	720 kg	725 kg	815 Kg	830 kg	840 kg	855 kg	—	865 kg	925 kg	945 kg	1000 kg

From infeed to outfeed, each panel passes through these units. The comparison table shows which model has which unit.

1 Infeed fence with counter
Sets the infeed position of the panel.
2 Pre-milling unit
Straightens the panel edge with DIA cutters before banding.
3 Gluing and pressure unit
Applies glue and presses the band onto the edge.
4 End trimming unit
Cuts the band overhang at the front and rear.
5 Top/bottom trimming and corner rounding
Removes top and bottom overhang and rounds the corners.
6 Radius scraping
Scrapes milling marks off the band surface.
7 Flat scraping
Cleans the surface on flat-edged bands.
8 Buffing unit
Polishes the band edge.
9 Grooving unit
Cuts grooves for back panels and drawer bottoms.
10 Top pressure beam with counter
Sets the top pressure to the panel thickness.
11 Gearbox unit
Drive unit for the feed track.